If it feels spongy and you can easily push on the line, the line is not taut enough, and you will need to start over. Having done this properly, the accumulated line on the spinning reel should be hard as a rock when you push on it. Then continue to step four.īefore you are ready to cut off the line and tie on a leader or a lure of some sort, you should have continued with step three at a slow to moderate pace while maintaining a taut line the entire time. Take the end of the monofilament fishing line and tie on the braided line using an FG knot. If at this point you are planning to lay a foundation of monofilament before switching to a braided line, fill the reel ¼ of the way full of the mono and then cut it off. You can reel much faster with a second person, but alone, you do not have that luxury. If you are alone, place the reel on the floor, and from a standing position, begin to slowly reel while applying pressure to the line between the reel and the first eyehole.Īnother pro-tip for doing this alone is to make sure you do this process methodically and not fast. You will also want to apply pressure to the line as you reel but taking your middle and index finger and gently squeezing the fishing line between the reel and the first eyehole.Īlso, please wear a glove or have a washcloth handy. This is to protect their hands from friction burns. Have your friend apply pressure to the line by either holding the line while wearing a glove or by pushing gently on the line while holding a washcloth. Next, make sure your drag is set to maximum tightness and begin to slowly turn the crank to reel in the first layer of fishing line on the reel. Using either the Phillips head screwdriver or a pencil, have your friend insert the tool into the hole in the middle of the spool of fishing line. Have them sit or stand about 15 feet away from you with the spool. The next step is where your friend will come in handy. If you are a visual learner then watch the video below and follow the steps. We will explain side-by-side the process for both spooling your reel alone and spooling your reel with the help of a friend. Now that we have all the items, we will need to complete the spooling process. Though not necessary, adding some monofilament line as a foundation on your spinning reel will prevent the braided line from slipping, saving you from future headaches when out on the water. Remember that if you are going to do a braided line, it might be a good idea to use some monofilament line as a foundation for the braided line. ![]() However, your spinning reel will have different capacity parameters for braided and monofilament lines. It does not matter if the line is braided or monofilament the process is the same for each type. ![]() ![]() Stay within these parameters to prevent any issues from occurring. The reel will have a maximum test weight capacity for the fishing line and a maximum distance capacity measured in yards. Make sure you know the fishing line specifications that are suitable for the spinning reel you have purchased.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |