There is a little visible nub on the outside of the bracelet but I’m ok with it as it really holds the disc in place well. I then painted the wrist/bracelet in the same blue as the disc. I added a little glue on the arm on the side of the disc away from the bracelet to give a little more hold. I put a little glue around the arm by the bracelet and mounted the disk. They are not exactly the same but similar. I painted the disk, first in solid blue and then making white swirls and painting on the runes. I used a round file to expand the hole to the desired size. Here I had to bore out the hole so that it fit the arm. The slit in the disk allowed me to easily put the disk on and have it butt up against the bracelet. This bracelet will help hold the disk on. The summoner has a bracelet on that arm and I cut outside of it (leaving the bracelet on the mini). At this point, I figured that this better work but I figured if it didn’t work, I could pin the hand back on. The scariest part was the Luke Skywaker moment of cutting off the hand. This allowed me to easily put the disk on the arm but that part will come later. I then cut from the center straight to an edge with an x-acto blade. This cutter worked nicely since I wanted a hole in the center. I used a Olfa compass cutter for this ( ). I also gave the lower edge of the cloak a very light brown to give it a little fade effect similar to the boots.įor the disc, I cut out a circle from a mini blister pack. I layered whites on the staff to bring it up to a brighter white color so that it stands out from the body. I glazed over the boots in brown lightly at the top and heavier at the bottom to capture a fade effect. For the skin, I glazed over the purple to bring it back to a color similar to the character card, blacked out the eyes and gave a little red to the lips. Miniatures are supplied unpainted and some assembly may be required. Please note: includes miniatures only No other character assets are included. Each miniature is stored in its own box to prevent spoilers. I highlighted the edges in a couple of whites. A set of the 18 miniatures featured in the Gloomhaven core game. I then used a purple wash for the entire figure (citidel leviathan purple). Thanks! Here are the details on the summoner.įor the mini, I primed in white (though in retrospect, grey might have been a better choice or black with white zenithal highlighting).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |